oshug

oshug@oshug.org

1 participants
431 discussions

Re: [oshug] oshug Digest, Vol 40, Issue 1
by Mark.itto 02 Aug '13

02 Aug '13

On Fri, Aug 2, 2013 at 1:00 PM, <oshug-request(a)oshug.org> wrote: > king Very very good! me likey... I still dont know which workshop i shop go trying to make my mind still :P Thanks for the reply.

1 0

OSHUG camp workshop ShrimpingIt
by Mark.itto 02 Aug '13

02 Aug '13

I'm curious about this one? what is the ShrimpingIt going to do here exactly? track a face and move the cam? are you going to use any sensor for this? or the cam feed that i'd imagine goes to a more powerful device do some image processing and then this is going to talk back to the uC ( MicroController ;P ) with some move camera this way or the other? Thanks and regards. PD. Friday drinks? whats going on? haven't seen any emails about this? plans?

2 1

Registration open for OSHCamp 2013.
by Andrew Back 25 Jul '13

25 Jul '13

Hello, This year OSHCamp is being run as part of a bigger event called Wuthering Bytes, and details of the OSHUG talks and registration can now be found at: http://oshug.org/event/oshcamp2013 Still waiting to confirm one more! We've got a pretty great line up — and very much in terms of the non-OSHUG (software/web/design) talks too. Much more info will be online in due course at: http://wutheringbytes.com The capacity is slightly higher than last year, but I'm expecting that with 18 talks (across two rooms) on the Saturday alone, demand will be also! As such I wouldn't hang about if you're planning on taking part :o) I would also expect that, like last year, rooms at Hebden Bridge Hostel will go pretty quickly too. Best, Andrew PS. No need to register if you are presenting or running a workshop, of course.

1 0

Fwd: reg:"FOSS LAB & OSH"
by Raja Rajan 24 Jul '13

24 Jul '13

Greetings, Hi friends , happy to be a part of you all !. . . i am willing to contribute the implementation of Embedded linux and Android and other open source tools for applications related to EEE,ECE,E&I engineering students and stuffs. Help to enrich my content with your suggestions and comments. -- With regards, Rajarajan.E, Chief Executive Officer/Technical Director, Industrial And Consumer Electronics R&D Department, Bluetronics Inc, No.8,Satya complex, karumandapam, Trichy. Tamil Nadu,India. http://bluetronics.co.in phone: +91-9791-838-816

1 0

Spaaaaaaaace!
by Andy Bennett 23 Jul '13

23 Jul '13

Hi, A friend of mine has set up this meetup: http://citizeninventor.eventbrite.co.uk/ ----- In our first meetup, we will try to whirlwind through what is already do-able and help to motivate you (if you are not already motivated) to get hacking with space. The line up will be announced closer to date. Expect info around CubeSAT and a bit on the wider economy of the space industry! PS: If you or someone you know would like to present or participate in our lightening talks for future events, please get in touch at contactme at citizen inventor dot com. It is the goal of this group to help spread the love and knowledge on space and environment hacking! ----- It looks cool so I strongly recommend it! Regards, @ndy -- andyjpb(a)ashurst.eu.org http://www.ashurst.eu.org/ 0x7EBA75FF

2 4

Adrian Bowyer (RepRap), Wed 2nd October.
by Andrew Back 23 Jul '13

23 Jul '13

Hello, Just a quick heads-up that we'll be hosting a joint event with the BCS OSSG in October, at which Adrian Bowyer of RepRap fame will be presenting, along with our very own Alan Wood. The website will be updated in due course, however, registration is now open and as spaces are limited and likely to go quickly, early booking is highly recommended! https://events.bcs.org/book/740/ Cheers, Andrew

1 0

Re: [oshug] Arduino help needed
by Jeremy Bennett 08 Jul '13

08 Jul '13

On 05/07/13 08:04, Paul Tanner wrote: > Hi Guys, > > I cheated and used node.js with a module called node-serial. I > discovered that you need to disconnect the serial port from the console > before you can use it (edits to /etc/inittab and /boot/cmdline.txt). I > imagine you'd need to do this in a python environment too. minicom was > very useful for prodding the serial device to make sure it was working > before I pointed my program at it. > > Regards, Paul Hi Paul, Omer, Andrew, Thanks for all the suggestions. It was all much easier than I thought, once I realized that the USB serial terminal is /dev/tty/ACM<n>, not /dev/tty/USB<n> when using Arduino Uno. It is trivial to use stty to set the line parameters and implement a simple C++ class to access the serial line on the host. Code on GitHub at: https://github.com/embecosm/esp9-arduino-facetracker I don't know if the face tracker works yet - the servos are lost in the post. But at least the Uno is getting some sort of serial data. Best wishes, Jeremy > At 06:38 PM 7/4/2013, Omer Kilic wrote: >> Hi Jeremy, >> >> This is a good starting point: >> http://playground.arduino.cc/interfacing/python >> >> pySerial documetation available here: http://pyserial.sourceforge.net/ >> >> >> HTH, >> Omer. >> >> On 4 July 2013 18:17, Jeremy Bennett <jeremy.bennett(a)embecosm.com> wrote: >> > I need some help from one of you Arduino gurus. >> > >> > I want to talk to the Arduino serial interface from a Fedora Linux >> system. I >> > know how to do the Arduino side, using Serial.available, Serial.read, >> > Serial.write etc. >> > >> > My problem is how to talk from the Linux end. All the examples I see >> are >> > Windows based and use Thierry Schneider's Serial C++ Library for >> Win32. What >> > do I use as the Linux equivalent? >> > >> > It's not as simple as just writing the the Linux device (in this case >> > /dev/bus/usb/004/081). I suspect I need something rather cleverer, >> but I >> > don't know what it is. >> > >> > Any help much appreciated. I'm trying to help a youngster set up an >> Arduino >> > based face tracker, driven by OpenCV face detection on the Linux box. >> > >> > Thanks, >> > >> > >> > Jeremy >> > >> > -- >> > Tel: +44 (1590) 610184 >> > Cell: +44 (7970) 676050 >> > SkypeID: jeremybennett >> > Twitter: @jeremypbennett >> > Email: jeremy.bennett(a)embecosm.com >> > Web: www.embecosm.com >> > >> > _______________________________________________ >> > oshug mailing list >> > oshug(a)oshug.org >> > http://oshug.org/cgi-bin/mailman/listinfo/oshug >> >> _______________________________________________ >> oshug mailing list >> oshug(a)oshug.org >> http://oshug.org/cgi-bin/mailman/listinfo/oshug > > Paul Tanner - Virtual Technologies - http://www.virtual-techno.com > Tel: +44 1494 581979 Mob: +44 7973 223239 mailto:paul@virtual-techno.com > > _______________________________________________ > oshug mailing list > oshug(a)oshug.org > http://oshug.org/cgi-bin/mailman/listinfo/oshug -- Tel: +44 (1590) 610184 Cell: +44 (7970) 676050 SkypeID: jeremybennett Twitter: @jeremypbennett Email: jeremy.bennett(a)embecosm.com Web: www.embecosm.com

1 0

Re: [oshug] Arduino help needed
by Paul Tanner 05 Jul '13

05 Jul '13

Hi Guys, I cheated and used node.js with a module called node-serial. I discovered that you need to disconnect the serial port from the console before you can use it (edits to /etc/inittab and /boot/cmdline.txt). I imagine you'd need to do this in a python environment too. minicom was very useful for prodding the serial device to make sure it was working before I pointed my program at it. Regards, Paul At 06:38 PM 7/4/2013, Omer Kilic wrote: >Hi Jeremy, > >This is a good starting point: http://playground.arduino.cc/interfacing/python > >pySerial documetation available here: http://pyserial.sourceforge.net/ > > >HTH, >Omer. > >On 4 July 2013 18:17, Jeremy Bennett <jeremy.bennett(a)embecosm.com> wrote: > > I need some help from one of you Arduino gurus. > > > > I want to talk to the Arduino serial interface from a Fedora > Linux system. I > > know how to do the Arduino side, using Serial.available, Serial.read, > > Serial.write etc. > > > > My problem is how to talk from the Linux end. All the examples I see are > > Windows based and use Thierry Schneider's Serial C++ Library for > Win32. What > > do I use as the Linux equivalent? > > > > It's not as simple as just writing the the Linux device (in this case > > /dev/bus/usb/004/081). I suspect I need something rather cleverer, but I > > don't know what it is. > > > > Any help much appreciated. I'm trying to help a youngster set up an Arduino > > based face tracker, driven by OpenCV face detection on the Linux box. > > > > Thanks, > > > > > > Jeremy > > > > -- > > Tel: +44 (1590) 610184 > > Cell: +44 (7970) 676050 > > SkypeID: jeremybennett > > Twitter: @jeremypbennett > > Email: jeremy.bennett(a)embecosm.com > > Web: www.embecosm.com > > > > _______________________________________________ > > oshug mailing list > > oshug(a)oshug.org > > http://oshug.org/cgi-bin/mailman/listinfo/oshug > >_______________________________________________ >oshug mailing list >oshug(a)oshug.org >http://oshug.org/cgi-bin/mailman/listinfo/oshug Paul Tanner - Virtual Technologies - http://www.virtual-techno.com Tel: +44 1494 581979 Mob: +44 7973 223239 mailto:paul@virtual-techno.com

1 0

Arduino help needed
by Jeremy Bennett 04 Jul '13

04 Jul '13

I need some help from one of you Arduino gurus. I want to talk to the Arduino serial interface from a Fedora Linux system. I know how to do the Arduino side, using Serial.available, Serial.read, Serial.write etc. My problem is how to talk from the Linux end. All the examples I see are Windows based and use Thierry Schneider's Serial C++ Library for Win32. What do I use as the Linux equivalent? It's not as simple as just writing the the Linux device (in this case /dev/bus/usb/004/081). I suspect I need something rather cleverer, but I don't know what it is. Any help much appreciated. I'm trying to help a youngster set up an Arduino based face tracker, driven by OpenCV face detection on the Linux box. Thanks, Jeremy -- Tel: +44 (1590) 610184 Cell: +44 (7970) 676050 SkypeID: jeremybennett Twitter: @jeremypbennett Email: jeremy.bennett(a)embecosm.com Web: www.embecosm.com

3 2

Preparing for Parallella, Sunday 21st July, Bletchley Park.
by Andrew Back 26 Jun '13

26 Jun '13

Hello, Parallella backers on the list may be interested in an event that Embecosm is hosting at the National Museum of Computing at Bletchley Park on Sunday 21st July: http://www.embecosm.com/2013/06/26/preparing-for-parallella-sunday-21st-jul… Cheers, Andrew

1 0

← Newer
1
...
24
25
26
27
28
29
30
...
44
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

oshug