oshug

oshug@oshug.org

430 discussions

Open Source Hardware Camp 2014, Sat 16 & Sun 17th August.
by Andrew Back 01 Jul '14

01 Jul '14

Hello, Registration is now open for OSHCamp 2014 and this year we will have in total 12 talks and 8 workshops — details below. Details for the Wuthering Bytes Festival Day on the Friday are yet to be announced, but there are some pretty great talks lined up, on topics ranging from development and testing of rockets, to being a computer programmer in the early 1960s. Speakers include Sophie Wilson, co-inventor of the ARM processor, and Open Rights Group. So, if you are considering attending on the Friday also, I wouldn't hang about as tickets are limited and likely to go fast! Cheers, Andrew // OSHCamp 2014 — 16 & 17th August at Hebden Bridge Town Hall, St. George's Street,Hebden Bridge, HX7 7BY. Registration: http://oshug.org/event/oshcamp2014 Open Source Hardware Camp will take place in the Pennine town of Hebden Bridge. For the second year running it is being hosted as part of the technology festival, Wuthering Bytes. However, this year OSHCamp will have the Waterfront Hall to itself on the Saturday and Sunday, with a separate Festival Day taking place on the Friday and with talks on a broader selection of technical topics. Details of the OSHUG talks and workshops can be found below and the Wuthering Bytes website will be updated in due course with details of the complete programme of events. Note that socials are planned for both the Friday and Saturday evenings, with the former being hosted at the Town Hall and where there will be a bar, food available and music and a live performance, and the latter will be hosted at a local hostelry that serves food. Hebden Bridge is approximately 1 hour by rail from Leeds and Manchester. Budget accommodation is available at the Hebden Bridge Hostel, with private rooms available and discounts for group bookings. Details of other local accommodation can be found at www.hebdenbridge.co.uk. — Saturday :: Talks * Linux bootloaders and kernel configuration Linux is popular in embedded devices, but most use it once the kernel has booted and don't consider how it was started. This talk explores just what happens when you first start an embedded device that is running Linux, and will look at common bootloaders, such as U-Boot, along with kernel boot options. Finally, we will look at useful kernel configuration options for embedded devices. Melanie Rhianna Lewis started a life long love of electronics as a child when her Dad helped her make a "crystal" radio with an ear piece, a coil of wire, a diode and a radiator! At the same time the home computer revolution started and she would lust after the "build your own computers" advertised in the electronics magazines of the time. She never got one but did end up the proud owner of a BBC Micro. Melanie learnt everything she could about the machine and including assembler, operating systems, drivers, interrupt, and, thanks to the circuit diagram in the Advanced User Guide, digital electronics. After the BBC Micro came the Acorn Archimedes and so started a long relationship with ARM processors. In the 90s Melanie became interested in Linux and then developed one of the first ARM Linux distributions running on an Acorn RISC PC. The hobby became a job and Melanie currently works for an embedded device consultancy near Bradford where a lot of her work is still with ARM processors. Recently Melanie became a sporty person and now spends a lot of her time hitting girls. She will probably bore you with tails of roller derby! * Open source archaeological geophysics - is it achievable? The advance of technology into Archaeology has allowed geophysical surveys to "peer into the ground" and direct the diggers to the most likely "targets". However, as anyone whose watched Time Team will know, using Resistivity and Magnetometry doesn't always guarantee results. Such equipment is not usually within the financial reach of most hobbyists. However, the recent explosion of the Arduino, Pi and other cheap electronics has meant making such surveying equipment may be possible. A small research project involving an informal collaboration between members of the Derbyshire Archaeological Society (DAS) & Derby Makers is exploring whether a high accuracy GPS unit, Magnetometer and a resistivity probe can be made and yield worthwhile results within a budget of £1,000. DAS has kindly funded this research and we are about 50% of the way through the GPS project. This talk will introduce the project and take a look at progress to date. Tony Brookes was firstly an engineer and then worked in IT for a while (!) Now working part-time, hobbies easily fill the time available. Drawn to archaeological and historical research by way of Time Team, he now tries to apply open source software (Scribus, Inkscape, Qgis) and hardware (Arduino, et al) to investigating parish history and other interesting topics. * An open source aquaponics control system Aquaponics is a closed system of food production that farms fish alongside vegetables, and this talk will look at the development of an open source aquaponics control system for the Incredible AquaGarden project in Todmorden, highlighting certain features of the design and exploring some of the difficulties encountered and how these have been addressed. A control and monitoring system with an event-driven 'flowchart' interface will be presented, where data about aspects such as pH, temperature and light level etc. are collected and logged in order to monitor the environment. The system responds dynamically to control the level of water in the plant growing bed, to maximise the yield. Some design decisions and technical aspects of the system will be demonstrated and discussed, together with the open source model for sustaining the project. Finally, we will look at the operational Node-RED installation in Todmorden, showing how the system is collecting readings and controlling the water level, and we'll talk about how MQTT has been used to loosely couple the code running on the Arduino with Node-RED on a Raspberry Pi. Gareth Coleman is a inventive hardware hacker who's talent lies in connecting diverse devices. Dr Naomi Rosenberg is a freelance software developer with a background in formal logic who works on a wide variety of platforms. They both get a especially enthusiastic about open hardware, free software and empowering humans. * From Idea to Finished Product: A Tale of DFM and CEM With numerous easily accessible embedded platforms around and concepts such as rapid prototyping and crowdfunding now being useful things as opposed to just buzzwords, designing the Next Big Thing without leaving your study is becoming a common story for makers and tinkerers. While it is true that going from an idea to a finished product has never been easier thanks to the abundance of design resources and affordable manufacturing services, designing for volume manufacturing requires a different mindset that usually does not apply to casual weekend hacks. From component choice to packaging and logistics, there are several elements that needs to be taken into consideration, as they may cause significant headaches otherwise. This talk will provide an overview of electronics manufacturing process, covering details such as managing design data, handling dependencies, component and process choices, testing and certification and several other aspects of DFM: Design for Manufacturability. Omer Kilic is an Embedded Systems hacker who likes tinkering, a lot. He also likes tiny computers, things that just work and good beer. * Driving milling machines with Linux Driving a milling machine with Linux is fairly easy and LinuxCNC (previously known as “EMC”) even provides a real-time distribution install disk. However, driving the machine is only half the story and gcode generation is at least as important. This talk will share experiences using a mill and a router with Linux, looking at PCB manufacture, engraving, 3D milling, casting, tool paths, materials, tools and parametric design. Matt Venn has run hundreds of creative science workshops for thousands of children and adults around the world. For the last year, he has been working with teachers in preparation for the computer science curriculum changes; creating and leading courses, workshops and projects. When he's not inventing new ways of getting people excited about science, Matt plays music, invents puzzle boxes, practices martial arts and maintains bikes. * Oxford Flood Network - easier to Apologise Than to Ask Permission Oxford Flood Network is a citizen sensing project which monitors water levels around the city, in streams, rivers and even under floorboards, sending water levels back to the Internet using low-powered wireless. The network explores the possibilities of a smart city that is created by its citizens, rather than a more typical top-down deployment. Sensor networks are generally used to collect data about us for reasons and agendas chosen by others, but we can build sensor networks too; crowd-sourced data can be gathered for your agenda — providing evidence for your issues. In this talk we will hear how Oxford Flood Network has developed an open source model for hardware and software, and the challenges of sticking mysterious boxes under bridges. Ben Ward is founder of Love Hz, promoting the use of white space spectrum for open innovation in the Internet of Things. A survivor of the dotcom bubble, subsea bandwidth glut and the UK broadband wars, he's still surprisingly optimistic about the future. * An introduction to writing applications for the Parallella board Parallella is a credit card-sized computer with a many-core accelerator that allows it to achieve high floating-point performance while consuming only a few watts. In this talk we will take a look at the Epiphany architecture and how to use the eSDK to write highly parallel applications for it, using hardware and software features to benchmark code and optimise performance. Simon Cook leads Embecosm's work on LLVM and is author of the standard guide to the LLVM assembler. He is also an expert on low-energy compilation and is lead engineer on the MAGEEC project. Simon holds a double first class honors degree in Computer Science and Electronics from Bristol University. * Radio Then and Pararchive: decentralised, pervasive, and open story telling Radio Then is a citywide cultural history experience, telling stories about Manchester’s jazz and popular music heritage using a small, Arduino-powered radio. Participants explore the city and tune in to archival broadcasts related to places, people, and events of note. In actual fact, the ‘radio’ contains GPS and audio breakouts to track its location and cue audio tracks depending on its coordinates. The project is being created to showcase findings from Pararchive, an AHRC project being conducted by the University of Leeds, in partnership with the BBC, National Media Museum, Science Museum Group, and Manchester Digital Laboratory, among others. Pararchive represents an opportunity for members of the public to engage with archives, decentralising the material from archive holders, and offering alternative and personal perspectives on events. James Medd is an artist, musician, and maker based in Manchester. He teaches all things digital in the north west of the UK, and creates whimsical, entertaining, and accessible interactive artworks. He currently leads Arduino Manchester, a community group for Arduino users in Manchester, and will be developing more interactive audio experiences at Watershed’s Pervasive Media Studio later this year, as a winner of their graduate and new talent competition. * Commercialising your ideas Whether you're taking the time to build something fun, or have a solution to a problem you have faced, you are 'in your own right' an inventor. One of the biggest challenges inventors face isn't making their product work, it's generating a living to continue inventing. Having spent over a decade in both sales and business development I have witnessed people use various methods to overcome this hurdle. I hope to share with you some of my experiences to provide you with some ideas you can take away and use when looking to turn a hobby or bright idea into a financial success. Our topic of conversation will take us from having a light bulb moment, to securing orders and reaping the rewards. William Stone is the Head of Channel Strategy for hardware manufacturer, Ciseco. He is responsible for various commercial areas of the business including the very familiar responsibility of growing Ciseco's rapidly expanding chain of partners and distributors. Now with 36 recognized distributors worldwide, Ciseco has a growing presence and reputation in electronics manufacturing and Internet of Things (IoT). * OpenTRV: energy technology that saves householders money The OpenTRV project aims to provide software, hardware designs and excellent interoperability to allow UK and EU householders to as much as halve their heating bills and carbon footprint with simple to fit hardware costing around £100 per house. Everything is freely available under liberal licensing — even our 3D printed enclosures — to enable adoption and cost savings. Damon Hart-Davis gets excited about electronics, parallelism, robotics, distributed systems and resource efficiency, and solar PV and halving space-heating carbon footprint with cheap microcontrollers (OpenTRV) are two of his current passions. Damon has been working on “mission-critical” systems in banking for most of the last 20 years and before that founded one of the first UK Internet Service Providers. * Interfacing with SPI and I2C SPI and I2C are industry standard methods of interfacing IO devices to micro-controllers and CPUs using just a few connections. SPI requires four wires and I2C just two. This talk introduces SPI and I2C. It describes how they work and how you use them. It will look at common IO devices that connect via SPI or I2C. Finally it will look at controlling SPI and I2C devices from two example controllers, the Arduino and the Raspberry PI, in languages such as C and Python. Speaker: Melanie Rhianna Lewis. Compered by: Paul Tanner is a consultant, developer and maker in wood, metal, plastic, electronics and software. His day job is IT-based business improvement for SMEs. By night he turns energy nut, creating tools to optimise energy use. Paul graduated in electronics and was responsible for hardware and software product development and customer services in several product and service start-ups, switching to consulting in 2000. — Sunday :: Workshops Some workshops will provide tools, boards and components etc. However, subject to demand this may involve an element of sharing and please feel free to bring along equipment and components, but note that you must be able to take full responsibility for your own personal safety and that of others in respect to these. Common sense must be exercised! * Let's build a flood network for Hebden Bridge! Split into two teams, one will attempt to install flood sensors on the beautiful Hebden Water just outside the venue, while the other links these these to the Internet using readily available technology. Proven hardware designs will be used to show you how can send water levels back to the Internet using low-powered wireless links, and sustainable approaches to citizen sensing will be explored. Run by: Ben Ward. Workshop notes: you may want to bring wellies if you plan to join the sensor installation team! Also feel free to bring sensors and boards that you think may be useful. * Building applications that sense and respond to the real world Following on from their talk, Naomi and Gareth will be joined by Paulo Marini, the Tormorden project's resident aquaponicist. Together they will facilitate a hack session to help you build applications that respond to the real world. Run by: Gareth Coleman and Dr Naomi Rosenberg. Workshop notes: Bring your own hardware to work on, such as Raspberry Pi and Arduino etc. if you can, and they'll try to find ways to get your projects connected. * Do you want to build a robot? #meArm assembly workshop How about starting with an Arm? With just a screwdriver and enthusiasm you can build an Open Source Robot Arm. If you bring an Arduino or Pi with you, you're free to stay on with your meArm and tinker with the code too. The meArm is a project to get low cost robot arms into the hands of as many people as possible. Started in February this year it's made fast progress through open development. Already "home brew" (those not from the laser forges of phenoptix in Nottingham) versions have been spotted in the UK, Switzerland, the USA and Mexico! Ben Gray is a proponent of Open Hardware and founder of phenoptix, a maker business based in Beeston, Nottinghamshire. Ben graduated from the University of Exeter with a chemistry degree and a fledgling phenoptix before moving to Nottingham to complete a PhD in theoretical physical chemistry. Through the open hardware movement he has been able explore the wonderful world of electronics and take phenoptix from a pocket money project to the full time job it is today. Workshop notes: Bring along a laptop and, if you like, an Arduino or Raspberry Pi. * Introduction to Bus Pirate The Bus Pirate is a universal open source hardware device that can be used to communicate using various buses, such as SPI, I2C, UART and JTAG, with various devices. The Bus Pirate is, per the designers, intended to "Eliminate a ton of early prototyping effort with new or unknown chips." This tutorial will introduce the Bus Pirate. Describe how to configure it and install the software required to use it. It will then look at some basic interfacing to devices via SPI and I2C. It will work through how you can 'sniff' buses. Finally it will look at use the Bus Pirate as a simple frequency measurement and generator device. Run by: Melanie Rhianna Lewis. Workshop notes: bring along a laptop (Bus Pirate is supported under Windows, Linux and OSX) and, if you can, some hardware to debug. There will be a limited number of Bus Pirates available, but if you have one please bring it along. * Building your first Parallella application This workshop follows on from the previous day's talk and participants will build a simple project which targets the Parallella board and uses all 16 cores of the Epiphany floating-point accelerator. Run by: Simon Cook. Workshop notes: Please bring along a laptop and, if you have one, a Parallella board (a limited number of boards will be available for use by those who do not own one). The real world works concurrently and so can you This workshop will take you through the basics of embedded concurrent programming using an XMOS multi-core startKIT. We will cover basic parallel processing extensions to C (XC) using tasks, interfaces, timers and ports. We will also get some insight into our running code using xSCOPE, a real-time debugging system built in to the XMOS tools. In addition we will use software modules to drop in rich functionality from the open source xCORE libraries. Run by: Alan Wood. Workshop notes: bring along a laptop and any devices you would like to interface. * Design a PCB Shrimp and have it fabricated The Shrimp is a super low cost Arduino clone. It makes an excellent teaching resource, and is usually delivered as a 'breaded shrimp' - using a breadboard. For hackers, it's a great way to knock up a quick, cheap microcontroller circuit. In this workshop we'll make a PCB version of the shrimp — a more robust and Arduino shield compatible version — and you will be guided through the process of drawing the schematic, laying out the PCB and optionally placing an order with OSHPark for your very own PCB shrimp. Participants will be working in pairs. Boards will cost about £6 each. Kits of components can conveniently be ordered from shrimping.itfor £4. Run by: Matt Venn. Workshop notes: bring along a laptop. * OpenTRV build and getting started Kits will be available to solder and boards and cables to buy, along with valves that will be used to demonstrate how you can use Arduino-based technology to halve your heating bill. Run by: Damon Hart-Davis. Workshop notes: Please bring your own soldering iron, solder and AA batteries if you would like to build a kit to take away, and be aware that SMD soldering experience and a steady hand will be required to solder the TMP112 temperature sensor. NOTE: * There are separate tickets for Friday, Saturday and Sunday. * A light lunch and refreshments will be provided each day. * Please aim to arrive between 09:00 and 09:15 on the Saturday as the event will start at 09:20 prompt. With thanks to sponsors: * DesignSpark - http://www.rs-online.com/designspark/electronics/ * XMOS - http://www.xmos.com

1 1

#techmums Shrimping workshop this Sunday.
by Andrew Back 06 Jun '14

06 Jun '14

Hello, #techmums in association with Embecosm, RS Components and Ravensbourne are hosting a Shrimping workshop this Sunday for mums, that is free to attend and with activities also being organised for children. It is somewhat short notice, but if you could help spread the word it would be much appreciated. Further details and registration at: http://www.eventbrite.co.uk/e/free-techmums-workshop-tickets-11638327551 Cheers, Andrew

2 2

OSHCamp 2014 CFP.
by Andrew Back 31 May '14

31 May '14

Hello, This year OSHCamp will be taking place over the weekend of 16-17th August and once again hosted at Hebden Bridge Town Hall (HX7 7BY). Proposals for talks and workshops are invited. There is no theme and topics may include, for example: * Open source hardware projects * Open development practices and principles * Novel/interesting/fun projects built using open source hardware * Tools (hardware and software) * Skills and techniques, e.g. PCB fab, DIY SMT assembly * Relevant technologies, e.g. SPI/I2C bus programming * ...something else relevant to the community! If you would like to give a talk on the Saturday and/or run a workshop on the Sunday contact me off-list. Please note that the deadline for submitting titles and abstracts is Saturday 14th June (yes, only 2 weeks away!) And so if you would like to discuss ideas etc. better to get in touch sooner, rather than later. Cheers, Andrew

1 0

Shrimping workshop, Wed 21st May.
by Andrew Back 20 May '14

20 May '14

Hello, Next Wednesday at the BCS offices and from 2PM-5PM in the afternoon prior to OSHUG, Embecosm will be hosting a Shrimping [1] training session. The main purpose of which is to train #techmums [2] trainers in how to facilitate a workshop at which participants first construct the basic Shrimp circuit and then the POV project. There are a few additional places available for non-#techmums trainers and if you're interested in taking part you can register via: https://events.bcs.org/book/1101/ Cheers, Andrew [1] http://shrimping.it/blog/shrimp/ [2] http://techmums.co/

1 1

TEMLIB
by Sevan / Venture37 14 May '14

14 May '14

Hi, There's a project written in VHDL which implements a SPARCv8 CPU, if any is interested. http://temlib.org/site/ Sevan

1 0

Fwd: [Oxhack] Abridged summary of oxford-hackspace@googlegroups.com - 2 updates in 2 topics
by Ben Ward 06 May '14

06 May '14

Natalie, the OSHUG (Open Source Hardware User Group) people are friendly and know all there is to know about Arduino and more. Hi OSHUGgers, As a member of Oxford Hackspace I got this email below from Natalie Ford at Science Oxford. She's looking for a Science Projects Officer - Arduino project teacher for holidays and after-school clubs. (Not sure if it's full-time, but seems likely.) I thought someone might be interested or have a recommendation. Ben ben(a)love-hz.com ---------- Forwarded message ---------- From: Natalie Ford <Natalie(a)monotreme.co.uk> Date: 6 May 2014 17:20 Subject: Re: [Oxhack] Abridged summary of oxford-hackspace(a)googlegroups.com- 2 updates in 2 topics To: oxford-hackspace(a)googlegroups.com Hi folks, We have a job going at Science Oxford teaching programming Arduinos to young people in holiday and after school clubs. These will be free for the participants. This is for a 4 month paid contract. If you are interested in the job see www.scienceoxford.com/jobs. We are also looking for volunteers who might want to help out at one or more club sessions. If you are interested in helping out as a volunteer then contact me. If you know anyone else who might be interested in the job or the volunteering opportunity then do pass this on to them.

1 0

OSHUG #34 — Teaching, Wednesday 21st May.
by Andrew Back 06 May '14

06 May '14

Hello, Registration is now open for the meeting May meeting, which is in just over 2 weeks time and will be on a Wednesday this month. Cheers, Andrew // Event #34 — 21st May 2014, 17:30 - 20:30 at BCS London, 1st Floor, The Davidson Building, 5 Southampton Street, London, WC2E 7HA. Registration: http://oshug.org/event/34 The thirty-fourth OSHUG meeting will feature three talks that each explore approaches to teaching electronics and programming. — Teaching with the LilyPad Arduino In this talk we will hear about experiences of teaching basic electronics and coding principles via wearable technology and e-textiles, using the LilyPad Arduino — a sewable microcontroller — in workshops with people of all ages at universities, schools at hackspaces. Rain Ashford designs and constructs wearable technology, e-textiles and interactive artworks. A PhD candidate at Goldsmiths, where she is investigating the possibility that wearable technology can be used to augment new forms of non-verbal communication, particularly in the areas of body language and emotion, by the amplifying and visualising of physiological data. She has studied Fine Art, Multimedia, and Electronics Engineering, which has led to her work developing as a convergence of art, programming and electronics. — Raspberry Pi in education Challenges, benefits and experiences with the Raspberry Pi as an educational tool. Matt Venn has run hundreds of creative science workshops for thousands of children and adults around the world. For the last year, he has been working with teachers in preparation for the computer science curriculum changes; creating and leading courses, workshops and projects. When he's not inventing new ways of getting people excited about science, Matthew plays music, invents puzzle boxes, practices martial arts and maintains bikes. — MzTEK: festivals, workshops and take away technologies MzTEK is a non-profit organisation that aims to redress the imbalance of women artists working in the fields of new media, computer arts, electronics and technology. Based in London and supported by Hackney arts institution [ space ], and Centre for Creative Collaboration in Kings Cross, and hosting a range of workshops, talks and self-initiated tinker sessions. In collaboration with partner organisations, MzTEK develop interesting, accessible and curiosity igniting workshops that can be delivered in short time frames and engage a wide audience with varying skills. Working with open source technologies and tools to help ensure that participants continue making and tinkering with the technologies they encounter long after workshops. Furthermore, doing this at festivals and events where the hope is to encounter a broad range of participants and unpredictable work environments! This talk will discuss some previous projects such as the Hacked Human Orchestra, a wearable electronics project devised in collaboration with Guerrilla Science, and suggest ways that thematic focus, together with a well balanced combination of skill acquisition, creativity and fun can enhance workshop delivery. Shauna Concannon is an interdisciplinary researcher interested in communication spaces and constructive disagreement. She has been working with MzTEK for the past few years, developing and facilitating workshops in Processing, Arduino and wearable electronics. She is currently undertaking a PhD in Media and Arts Technology at Queen Mary University of London. Note: Please aim to by 18:15 as the first talk will start at 18:30 prompt.

1 0

Open-source verification
by Chris Higgs 04 May '14

04 May '14

All, I would like to present on the topic "Cocotb" at a future OSHUG event. Cocotb[1] is an open-source Python framework for verifying RTL written in [System]Verilog or VHDL. It has been used to successfully verify multiple large FPGA designs (>500k registers). It also serves to bridge the gap between traditional FPGA/ASIC practices and software developers, as well as helping to introduce agile methodology and continuous integration to hardware teams. Cocotb works well with Icarus Verilog, providing a powerful open-source alternative to SystemVerilog based verification frameworks like UVM which require users to spend many thousands of pounds on simulator licenses. For those wishing to use SystemVerilog without paying for a license it can also be used with the free version of Mentor Modelsim (Altera Starter Edition). A presentation would be a good follow-up to the up-coming ChipHack event to demonstrate one of the possible ways of verifying more complex designs for those wishing to pursue FPGA development further. Depending on the experience and interests of the audience I can present different aspects of Cocotb, e.g. how the framework was designed, co-simulating unmodified software, interacting with the outside world from simulation, SoC driver development, lessons learned etc. Thanks, Chris [1] http://potentialventures.github.io/cocotb/

1 0

Novena
by Sevan / Venture37 30 Apr '14

30 Apr '14

Open source laptop http://www.crowdsupply.com/kosagi/novena-open-laptop >From the guys who did the hacking SD cards talk at CCC last year http://www.youtube.com/watch?v=r3GDPwIuRKI Sevan

1 0

(no subject)
by 李正义 23 Apr '14

23 Apr '14

李正义中南民族大学/老师武汉市洪山区民族大道182号

1 0

← Newer
1
...
18
19
20
21
22
23
24
...
43
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

oshug