Hi all
Seeking electronics expertise (when it comes to making I'm better at wood!).
A few years ago we pushed the boat out while completing an "extension
extension" and re-roof project by adding electrically operated
between-glass blinds with solar-charged blind controllers to the windows.
The controllers are starting to fail, mostly battery or charging circuit
issues and without them the blinds don't work. I'd be not too bothered,
except the manufacturer and their distributors are charging an eye-watering
£135 for a replacement unit and the units are kind of flaky in use (need
resetting often, which is done by plugging them to a (any) USB charger).
The units consist of a USB charging port (for when the solar isn't enough
to keep them charged), a 5 point connector and 2 touch sensitive areas with
LED back lights, and a simple RF remote control, powered by a small battery
(3.7V, 2700mAh). The most complex element is the ability to program (via
reset and counting light flashes etc.) the units to respond to 99 different
channels on the remote - I can imagine a commercial setup where that might
be useful, or if you have the functionality in every room (though 99 is a
lot of rooms...) but in practice we use the controller to raise/lower all
the blinds at once, so only use one channel
So the questions... how practical would it be to reproduce this
functionality, with a similar physical form factor so they can attach to
the window mounts (which are wired to the motors inside the window and the
tiny solar panels on the outside), in part (no RF or simple RF controls all
units) or in whole (99 channels does seem excessive...)? Given the price
being charged for replacements, it might be feasible to replace the window
mount and solar panel if that makes it more practical (requires popping the
window from the frame but that's not a lot of work for someone who knows
double glazing).
At a simpler level, how easy is it likely to be to source suitably shaped
batteries to replace battery units?
All input welcome and if you need more info to provide better input please
don't hesitate to request it.
Cheers
Chris
--
@putt1ck
Opinions in this email are my own and may not reflect that of my
clients, past employers, associates, friends, family, pets etc..
