oshug January 2013

oshug@oshug.org

5 participants
5 discussions

OSHUG #23 — Products (Nanode, Industry Perspective, Licensing Update), Thursday 21st February.
by Andrew Back 24 Jan '13

24 Jan '13

Hello, Hope everyone had a good time over the festive period! Looking forward to our first meeting of the year, details of which are below. Cheers, Andrew // OSHUG #23 — Products (Nanode, An Industry Perspective, Licensing Update) 21st February 2013, 18:00 - 20:00 at Centre for Creative Collaboration, 16 Acton Street, London, WC1X 9NG. Sponsored by DesignSpark: http://www.designspark.com Registration: http://oshug.org/event/23 Coming up for a year ago, at OSHUG #16, we heard three first-hand experiences of developing open source hardware designs into finished products. At the twenty-third meeting we'll further explore this topic through reflections on the Nanode project as it approaches its second anniversary, and an industry perspective on developing open source hardware. There will also be an update on developments in open source hardware licensing, a subject that was explored at the second OSHUG meeting back in May 2010. - As Nanode Approaches Two With the second anniversary of the Nanode project approaching and in excess of 2,500 sold worldwide, this talk looks at the initial aims, commercialisation and spin-offs as a typical open source hardware design. Exploring the concept, start-up phase and challenge of maintaining momentum in a constantly evolving open source marketplace. Ken Boak has worked in electronics hardware design for 25 years. Initially with BBC Research Department where Ken worked on early HDTV digital picture processing systems. In 1998 Ken embarked on ten years in telecommunications and volume product production in the Far East. Recently Ken has worked on scientific and educational instruments, and open source systems both in the UK and USA. - Open Source Hardware Licensing Update It's been a busy time in open source hardware licensing - CERN's Open Hardware Licence has been undergoing a lot of work behind the scenes, and a new version is about to be released. There are rumours of a new version of the TAPR Open Hardware licence, and the debate between copyleft and academic licences rages on. Andrew Katz has been involved of all of these activities and will provide an update on the current state of licensing, and some pointers on the best licence to adopt. Andrew Katz is a partner at boutique law firm Moorcrofts LLP in the Thames Valley. He specialises in IT/IP work, and in particular advises clients on licensing and liability issues around open source software.He was involved in drafting both GPL3 and the England and Wales version of the Creative Commons licence as well as all major open hardware licences. Many years ago, he designed and built a Z80 SS50 bus-based computer system, created a lightweight version of the Citroen Dyane, mainly by ripping it body off, and hacked together an air compressor from bits and pieces found in a scrapyard. He is currently part-time interim COO of the Maria DB foundation. - Developing Open Source Hardware: an Industry Perspective RS Components have developed a new platform for which the hardware design will be published under an open source licence. This talk will provide an overview of this exciting new development and provide an insight into the motivations for making the design freely available to all. The product development and manufacturing process will also be covered in brief along with some of the challenges experienced, and the broader project goals and ongoing commitment to the open source community. Mike Brojak is responsible at RS Components for the development of free resources for electronics engineers, and believes in helping engineers to be more productive in order to achieve their highest potential. His technical background is in hardware and software for embedded systems, primarily for mobile automation control. He has an Electronics Systems Design degree from Oxford Brookes University. Note: Please aim to arrive for 18:00 - 18:20 as the event will start at 18:30 prompt. Registration: http://oshug.org/event/23

1 0

Re: [oshug] March OSHUG.
by Andrew Back 11 Jan '13

11 Jan '13

Hi Paul, On 10 January 2013 20:21, Paul Tanner <paul(a)virtual-techno.com> wrote: > Hi Andrew, > Did you decide which Weds? My worst day of the week but I will probably be > in too if I'm not skiing (even more important than OSHUG, sorry). Wednesday 20th March. Best, Andrew > Best/ P > > At 10:35 AM 1/10/2013, you wrote: >> >> All, >> >> The March OSHUG meeting will be taking place on a Wednesday, and since >> this is not the usual day of the week I wondered if we might try >> something unusual... Well, actually not that strange, and in fact I >> was thinking maybe a show and tell with a greater number of shorter >> presentations. No theme as such, just show us what you've made! >> >> Thoughts and offers to show and tell would be most welcome. >> >> Best, >> >> Andrew >> >> _______________________________________________ >> oshug mailing list >> oshug(a)oshug.org >> http://oshug.org/cgi-bin/mailman/listinfo/oshug > > > Paul Tanner - Virtual Technologies - http://www.virtual-techno.com > Tel: +44 1494 581979 Mob: +44 7973 223239 mailto:paul@virtual-techno.com > > > _______________________________________________ > oshug mailing list > oshug(a)oshug.org > http://oshug.org/cgi-bin/mailman/listinfo/oshug -- Andrew Back FRSA MIEEE http://carrierdetect.com

2 4

Re: [oshug] March OSHUG.
by Paul Tanner 10 Jan '13

10 Jan '13

Hi Andrew, Did you decide which Weds? My worst day of the week but I will probably be in too if I'm not skiing (even more important than OSHUG, sorry). Best/ P At 10:35 AM 1/10/2013, you wrote: >All, > >The March OSHUG meeting will be taking place on a Wednesday, and since >this is not the usual day of the week I wondered if we might try >something unusual... Well, actually not that strange, and in fact I >was thinking maybe a show and tell with a greater number of shorter >presentations. No theme as such, just show us what you've made! > >Thoughts and offers to show and tell would be most welcome. > >Best, > >Andrew > >_______________________________________________ >oshug mailing list >oshug(a)oshug.org >http://oshug.org/cgi-bin/mailman/listinfo/oshug Paul Tanner - Virtual Technologies - http://www.virtual-techno.com Tel: +44 1494 581979 Mob: +44 7973 223239 mailto:paul@virtual-techno.com

1 0

The BLN "CEO Tales: Open Source Business Models"
by Jeremy Bennett 10 Jan '13

10 Jan '13

OSHUG members who have a commercial interest in Open Source may be interested in the following networking event organized by theBLN on Open Source Business models http://ceotalesopensource.eventbrite.co.uk I'll be attending. My experience is that theBLN is quite effective at bringing together businesses and investors. Best wishes, Jeremy -- Tel: +44 (1590) 610184 Cell: +44 (7970) 676050 SkypeID: jeremybennett Email: jeremy.bennett(a)embecosm.com Web: www.embecosm.com

1 0

March OSHUG.
by Andrew Back 10 Jan '13

10 Jan '13

All, The March OSHUG meeting will be taking place on a Wednesday, and since this is not the usual day of the week I wondered if we might try something unusual... Well, actually not that strange, and in fact I was thinking maybe a show and tell with a greater number of shorter presentations. No theme as such, just show us what you've made! Thoughts and offers to show and tell would be most welcome. Best, Andrew

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

oshug January 2013